iosr-jpte   Volume-10 ~ Issue-2 ~ Mar. – Apr. 2023

[1]. Sanad, Suzan H | El-Sayed, M. A. M | Mohamed, A. M (2008) Quality characteristics of ring and O.E. yarns spun from Egyptian and Upland cotton blends. Egyptian J. Agric. Res., 86, (3) 1011-1025
[2]. Rizk , M.A.M.; Azab, A.M. E. ;Mesbah, E. A.; Hassan, A. A. and Yonis M. A. Sh. (2016) Technological study on some yarn properties of long staple in Egyptian cotton varieties. Al-Azhar. J. Agric. Res., 26:570-577.
[3]. Hassan, A.A. (2006). Production of low priced medium coars yarn with acceptable quality using rotor spinning system. Ph. D. thesis, Fac. Agric., Al-Azhar Univ., Egypt.
[4]. Gad Allah, A.E.M. and Rania, M.; Abdel-Twab (2019) Effect of blending treatments between upland cotton (Gossypium hirsutum L.) and Giza 95 cultivar (Gossypium Barba dense L.) On fiber and yarn quality. Bull. Fac. Agric., Cairo Univ., 70:351-361.
[5]. Entsar A. F. Abdel-Ghaffar; Gaber Y. M. Hammam; Ahmad A. A. El-Hosary; El-Saeed M. M. El- Gedwy and Abd El-Based A. Hassan (2019) Influence of Some Commercial Blends between the Imported Cotton and the Upper Egyptian Varieties on Technological Properties Annals of Agric. Sci., Moshtohor,Vol. 57 (1) , 31 – 38

[1]. ÇoruhE.Optimization of comfort properties of single jersey knitted fabrics .Fibres & Textiles inEastern Europe 2015;23, 4(112) : 66-72.
[2]. El-Tarfawy SY.Failure behavior of polyester/ lycra single jersey knittedFabric .Journal of American Science 2016 ;12(5): 52-58.
[3]. Uyanik S. Analysis of splicing method on bursting strength of the knittedfabrics.Çukurova University Journal of the Faculty of Engineering and Architecture2020; 35(4): 959-968
[4]. SitotawDB.An investigation on the dependency of bursting strength of knitted fabrics on knit structures .Industrial Engineering & Management2017;6(3) : ISSN 2169-0316.
[5]. BadrAA,NahrawyAE.Optimizing the cotton and cotton/ modal blended fabric properties on single jersey machinery .Beltwide Cotton Conferences. New Orleans. Louisiana2010 ;4 (7): 1664-1673

[1]. Abd-Elkawe, E.Y. and Aly, N.M. (2019). Comparative study of quality properties for open-end yarns produced from blending natural and synthetic fibers. Journal of the Textile Association. 423-430.
[2]. Abd-Elkawe, E.Y. and El-Sayed, E.R. (2021) .Production of Fine Count Yarns from Some Extra-long Egyptian Cottons on Different Spinning Systems.European Journal of Agriculture and Food Sciences.3 (5):90-96.
[3]. Arafa H. M. (2009) .Comparative study on spinning potential and yarn quality of promising crosses and some Egyptian cotton cultivars. Ph.D, Thesis, Fac. of Agric. Cairo Univ., Egypt.
[4]. Arafa H. M. (2019). Producing yarns from blends of card wastes, recycled fabric and medium quality cotton. Bull. Fac . Agric., Cairo Univ., 70: 453-460
[5]. ASTM (1993). American Society for Testing and Materials. Standards of Textile Testing and Materials. (D 1578 -93). USA.

[1]. Akpa, J.G. (2012). Production of Cassava Starch Based Adhesive. Research Journal in Engineering and Applied Sciences,1 (4): 214-219.
[2]. Jeong, B. M. (2014). Drying Adhesive. Dentistry and Endodontics. National Centre for Biotechnology Information U.S 39 (2): 148.
[3]. Lara, R. P., Ehsan, S.S., Andrew, S., Wendy, Y., Benjamin, M. G., Iman, N., Thomas, J. W. and Nasim, B. (2018). Engineering Adhesive and Antimicrobial Hyaluronic Acid/Elastin-like Polypeptide Hybrid Hydrogels for Tissue Engineering Applications. ACS Biomater. Sci. Eng. 4 (7) 2528-2540.
[4]. Marques, E.A.S, Lucas, F.M, Silva, M. DA., Banea, M.D. and Carbas, R.J.C. (2015). Adhesive Joints for Low and High-Temperature Use: Am Overview. The Journal of Adhesion. 91(7): 55-586.
[5]. Masumbu, F.F.F, Masamba, W.R.L and Fabiano, F. (2003). Development and Evaluation of Maize and Cassava Starch Based Cold-Setting Adhesives for Case –Sealing.

[1]. S. P. Gubin, Yu. A. Koksharov, G. B. Khomutov, and G. Yu. Yurkov, Usp. Khim.74, 539 (2005).
[2]. S. P. Gubin, G. Yu. Yurkov, and N. A. Kataeva, Neorg.Mater. 41, 1159 (2005) [Inorg.Mater.41, 1017 (2005)].
[3]. S. P. Gubin, N. A. Kataeva, and G. B. Khomutov, Izv. Akad.Nauk, Ser. Khim., No. 4, 811 (2005).
[4]. G. Yu. Yurkov, S. P. Gubin, D. A. Pankratov,et al., Neorg. Mater.38, 186 (2002) [Inorg.Mater.38, 137 (2002)].
[5]. S. P. Gubin, Yu. I. Spichkin, Yu. A. Koksharov, et al., J. Magn. Magn.Mater.265, 234 (2003)..